The most important features of the HTD 30 models
HTD 30
Easy to use.
Work with confidence. Just load and drive.
- Extra-flat ramp angle
- User-friendly turnbuckles
- Lashing points with position lock
HTD 30
Use it for life.
The HTD 30 stands up to the test – and we stand by our word: With a 10-year warranty against rusting through.
- Corrosion protection thanks to galvinisation
- Stability thanks to solid welded frames
- The highest quality workmanship and parts
HTD 30
Secure transport.
The load is secure. The ride is stable. Just drive, and get there safely!
- Increased safety in load securing thanks to numerous lashing points
- Additional security via the optional lashing rings on the outer frame
- Safe driving thanks to low load height
HTD 30
Save in the long-term.
An HTD 30. Optional accessories. All you need. Never again!
- Additional parts for all models
- Triple-adjustable drawbar
- Lasts a lifetime
Your package of heavy-duty benefits from Humbaur
- Tyre pressure monitoring system as standard on all heavy-duty trailers including Auto-Locate function for up to 12 wheels per trailer
- Standard EBS brake system with spring brake for better braking
- Full LED rear lights as standard for better visibility and a modern design
- Flashing side marker lights as standard for better visibility
- Treated/varnished wood as standard for visual enhancement and protection against environmental factors
- Rear apron fitted as standard to prevent spray mist in rainy weather
Additional equipment features
- SAF flatbed axles with closed S-cam brakes (optional: parabolic spring axles)
- Pneumatic spring assembly, including lifting and lowering, acting on the rear axle unit (optional: parabolic spring assembly)
24V EBS brake system including EBS connector, spring accumulator parking brake
Tyres at the manufacturer’s discretion 12x / 235/75 R17.5
1,800 mm drawbar with 8° inclined towing eye Ø 40 mm, low-maintenance silent bushings
- Shock-resistant, vibration-proof full LED lighting with multi-voltage (12-24 V), blinking lateral lights, multi-chamber tailgate lights, with underride protection
- 15-pole power cable
- Front storage box on the plateau, with hinged lid, size approx. L 700 x W 810 x H 140 mm
- Stanchion bag stowage in the out frame
2 pairs of stanchion bags 90 x 50 mm in the upper platform
4 pairs of stanchion bags 90 x 50 mm in the flatbed - 4 pairs of lashing rings 10 metric tons, set into the flatbed
2 pairs of lashing rings 10 metric tons, set into the upper platform
2 pairs of lashing points in the outer frame
2 pairs of lashing/stanchion bags 3 metric tons, in the platform outer frame
4 pairs of lashing/stanchion bags 3 metric tons, in the flatbed outer frame
4 pairs of lashing points 2 metric tons, above the wheel cutouts of the 2nd and 3rd axle
Single-piece hot-dip galvanised ramps with 50 mm softwood covering, painted/impregnated, laterally adjustable, direct-acting vertical spring lifting jack, optimally secured via turnbuckle and counterstop
- Solid welded construction made of high-strength fine-grained steel, full-width crossbars for maximum stability, wheel arches over the rear wheels, corners chamfered at the front, rear side climbing rails on the ramp for maximum safety during loading and unloading
- Chassis frame and bogie hot-dip galvanised in an immersion bath
- Flooring made of 50 mm softwood covering, painted/impregnated
- Folding side impact protection, side and rear contour markings, half-shell mudguard made of plastic at the front and straight steel mudguard at the rear with anti-spray mats, two wheel chocks
- Foldable rear support legs to the left and right of the chassis frame
- Low-maintenance slewing ring
- Steel air container
Models
-
HTD 308525-3A gekröpft Parabelfederaggregat
with an offset bed surface and parabolic spring assembly
Gross weight:24.000* / 30.000** kgLoad capacity:17.700* / 23.700** kgInner length:6.490 mmInner width:2.540 mm -
HTD 308525-3A gekröpft
with an offset bed surface
Gross weight:24.000* / 30.000** kgLoad capacity:17.700* / 23.700** kgInner length:6.490 mmInner width:2.540 mm -
HTD 308525-3A gekröpft Radmulden
with an offset bed surface and wheel recesses
Gross weight:24.000* / 30.000** kgLoad capacity:17.700* / 23.700** kgInner length:6.490 mmInner width:2.540 mm -
HTD 308525-3A gerade
with a flat bed surface
Gross weight:24.000* / 30.000** kgLoad capacity:17.700* / 23.700** kgInner length:8.530 mmInner width:2.540 mm
Compare models
| | HTD 308525-3A offset | HTD 308525-3A offset wheel recesses | HTD 308525-3A offset parabolic spring assembly | HTD 308525 straight |
| Total permissible weight in kg | 24,000* / 30,000** | 24,000* / 30,000** | 24,000* / 30,000** | 24,000* / 30,000** |
| Overall dimension in mm (LxWxH) | 10,780 x 2,540 x 3,780 | 10,780 x 2,540 x 3,740 | 10,720 x 2,540 x 3,340 | 10,770 x 2,540 x 3,780 |
| Flatbed, incl. tailgate slope in mm | 6,490 x 2,540 | 6,490 x 2,540 | 6,490 x 2,540 | 8,530 x 2,540 |
| Payload in kg | 17,700* / 23,700** | 17,700* / 23,700** | 17,700* / 23,700** | 17,700* / 23,700** |
| Load height in mm | 890 | 890 | 890 | 930 |
| Ramp slope in degrees | 10 | 10 | 10 | 10 |
| Tyres in inches | 12x 235/75 R17.5 | 12x 235/75 R17.5 | 12x 235/75 R17.5 | 12x 235/75 R17.5 |
Subject to technical modifications. All dimensions are approximate values and refer to the standard vehicle without accessories. Additional equipment changes both the unladen weight and the load capacity!
* Permissible total weight for divisible load without special authorisation ** Permissible total weight for indivisible load with special authorisation in accordance with Article 70 of the STVO (Straßenverkehrs-Ordnung [German Road Traffic Act])
All information is provided without guarantee. Subject to change without notice. Images may show optional equipment. Accessories are available as an option.