The most important features of the HTK 14t models
HTK 14t
Easy to use.
- Steplessly adjustable draw tube
- 15-pin connector
- Motorised hydraulic three-way tipper
HTK 14t
Use it for life.
- Solid, welded and hot-dip galvanised frame
- Hot-dip galvanised with longitudinal, lateral and diagonal braces for exceptional stability and concentrated loads
Your package of heavy-duty benefits from Humbaur
- Tyre pressure monitoring system as standard on all heavy-duty trailers including Auto-Locate function for up to 12 wheels per trailer
- Standard EBS brake system with spring brake for better braking
- Full LED rear lights as standard for better visibility and a modern design
- Flashing side marker lights as standard for better visibility
- Treated/varnished wood as standard for visual enhancement and protection against environmental factors
- Rear apron fitted as standard to prevent spray mist in rainy weather
Additional equipment features
Axle with drum brake, no-maintenance parabolic suspension for optimal load compensation
Compressed air brake with release valve, automatic load-dependent ALB brake, connecting lines with couplings in red/yellow, ABS system with spinal parking brake
Central bar with 40-mm-diameter screw towing eye, galvanised, can be infinitely adjusted via the crank handle
- 24V lighting system with multi-chamber tail lights and LED lateral lights
- 15-pin connector
Lashing points 3 t set into the bridge floor (4 pairs / 4.5 m; 5 pairs / 5.0 m; 6 pairs / 5.5 m)
- Solid, welded and galvanised frame for optimal stability and safety; bridge floor made of 4 mm fine-grain steel, non-interchangeable rocker bearings
- Motorised hydraulic three-way tipping system, five-level cylinder with lift limiter
- Mudguards with anti-spray mats
- 2 wheel chocks with holder
- Reinforced 12 t gear-supported jack with load and overdrive speed
- Laser-welded quality steel side walls 500 mm, can be folded down on the sides and at the back, removable and oscillating with central locking mechanism, removable front wall
- Bridge frame hot-dip galvanised with longitudinal, lateral and diagonal braces for exceptional stability and concentrated loads
- Side walls primed and lacquered with high-quality 2K paint for optimal corrosion protection, sealed hollow spaces, your choice of single-colour paint in RAL
Models
-
HTK 145524
somewhat longer, but with somewhat lower payload
Gross weight:14.400 kgLoad capacity:10.300 kgInner length:5.540 mmInner width:2.420 mm -
HTK 145024
somewhat shorter, but with somewhat higher payload
Gross weight:14.400 kgLoad capacity:10.600 kgInner length:5.040 mmInner width:2.420 mm
Compare models
| | HTK 145524 | HTK 145024 |
| Total permissible weight in kg | 14,400 | 14,400 |
| Overall dimension in mm (LxWxH) | 7,450 x 2,550 x 1,610 | 6,950 x 2,550 x 1,610 |
| Payload in kg | 10,300 | 10,600 |
| Load height in mm | 1,070 | 1,070 |
| Tipping slope (to side/back) in degrees | 45/48 | 45/48 |
| Tyres in inches | 235/75 R17.5 | 235/75 R17.5 |
Subject to technical modifications. All dimensions are approximate values and refer to the standard vehicle without accessories. Additional equipment changes both the unladen weight and the load capacity!
All information is provided without guarantee. Subject to change without notice. Images may show optional equipment. Accessories are available as an option.